QSFP-DD-200G-SR8 100m Optical Transceiver
TARLUZ 200G QSFP-DD SR8 Optical Transceiver is a Double Density QSFP Transceivers with eight-channel. It is designed for 200G Ethernet (2 x 100GBASE-SR4) applications. The QSFP-DD transceivers integrate eight data lanes in each direction with 25.78Gb/s bandwidth per channel. Each lane can operate at 25.78Gb/s up to 70m over OM3 fiber or 100m over OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses MPO-24 (2 x 12F per row) connector.
Hot-pluggable QSFP-DD form factor
Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
8 channels full-duplex transceiver module, Transmission data rate up to 25Gb/s per channel
8 channels 850nm VCSEL array
8 channels PIN photo detector array
Internal CDR circuits on both receiver and transmitter channels, Support CDR bypass
Low power consumption <4W
MPO-24 connector receptacle
Built-in digital diagnostic function
Operating case temperature 0°C to +70°C
3.3V power supply voltage
RoHS 6 compliant (lead free)
Parameters Specifications
Form Type QSFP-DD
Max Data Rate 200Gbps
Optical Components 8x VCSEL
Wavelength 850nm
Max Cable Distance 100m@OM4
Interface MTP/MPO-24
Cable Type MMF
Commercial Temperature Range 0 to 70°C (32 to 158°F)
DOM Support Yes
This product can provide a new generation of low-cost, low-power, high-density, high-speed solutions for data centers.It can greatly meet the rapid growth of data center traffic.